Finishes do not affect how the lift runs, but they are what the passenger sees. Below is what the SJEC catalogue offers, from the basic car to ready-made designs, with material names as the factory writes them.
Standard car
There are two basic cars: wide and deep. The walls and doors are painted steel in RAL 7035, the ceiling is SC-101 or SC-103 with an acrylic panel, and the flooring is PVC. The next level is the classic series: JR-001 and JR-004 in brushed stainless steel.
Ready-made designs
Next in the catalogue come four series with sixteen designs. A few for reference:
| Design | Walls | Ceiling | Flooring |
|---|---|---|---|
| JR-101B | mirror stainless steel with an etched HQ-21 insert | TH-402B, acrylic panel and LED | marble DS-005 |
| JC-002 | Dark-Ti mirror stainless steel | SC-202 with an acrylic panel | marble DS-007 |
| JC-102 | side walls in Bronze-Ti, rear wall in FM102 3D laminate | SC-502 with LED lights | marble DS-009 |
| JH-003 | etched mirror Golden-Ti with brushed edges | SC-303 | marble DS-002 |
| VC-005 | wood-look side walls with mirror steel strips | backlit acrylic panel | marble |
Marble flooring in these designs is marked as an option. For the JC-002 design the catalogue gives a note: when the car width or depth exceeds 1600 mm, the acrylic ceiling panel is divided into two parts by a central frame.
Walls and doors
Painted steel comes in eight colours: RAL 7035, 7036, 9006, 9004, 9010, 1015, 6019 and 6027. Stainless steel is brushed (HS-001), mirror (HS-002) or etched with a pattern, from ES-002 to ES-005. The factory applies the Golden-Ti, Dark-Ti, Bronze-Ti and Champagne-Ti coatings to a mirror or brushed base. In the specification form, the landing door finishes for the main floor and for the other floors are specified on separate lines.
Ceilings, flooring, handrails
There are nine ceilings. SC-101 and SC-103 are standard; the rest are made to order: in brushed or mirror steel, with an acrylic panel or LED spotlights. The ceiling height is 100 mm; for SC-203 it is 150 mm and for SC-108 from 70 mm, which is worth bearing in mind when the car height is at its limit. An emergency trapdoor is possible in SC-104 and in four models from SC-111 to SC-114.
The basic flooring is PVC: plain tiles (BN2031, BN2038, WY9003), carpet-look or marble-look, from DP-001 to DP-009. There is also black and grey rubber, aluminium chequer plate and marble in four patterns. There are six handrails: the round HC-001 and HC-104, the double HC-002, the flat HC-003 and HC-601, and the HC-102 with a coloured insert. For EN 81-70 the factory fits the HC-104 with its ends turned towards the wall.
Operating panels and indicators
The COB050 in the front wall and the COB070 in the side wall are made to the full height of the car. The COB310 and COB650 are shorter. Landing call stations come surface-mounted (FOB340, FOB700) and flush-mounted (FOB310, FOB310S, FOB650). The standard position indicator is a segment LED. Options: dot-matrix LED, a 4.3 inch colour LCD for the landing call station, and a 7, 8 or 10 inch one for the car operating panel. The buttons are round BC001 or square BS001, with tactile markings.
The catalogue warns that additional functions such as access control or large buttons may change the size of the panel or reduce the maximum number of floors it can serve. Such matters are clarified before the specification is approved.
All sixteen designs, flooring samples and panel compatibility tables are in the "SJEC - LIFTPORTAL" 2026 catalogue (PDF, 9 MB). If you have already chosen a design, state it in your request together with the shaft dimensions.
