Find a lift +38 (050) 585-39-28

Catalogue

Inclined platform lifts for stairs and the KT-62 stairlift

PlatformGuide railGuarding

An inclined platform lift is installed where there is no room for a vertical one: a narrow residential entrance hall, stairs between floors in an old building, an entrance where the porch cannot be extended. It travels on a guide rail along the flight and, when folded, takes up a strip by the wall.

Platform lift for straight stairs

General view of the inclined platform lift for straight stairs: guide rail, carriage with control panel, platform with ramps
Inclined platform lift for straight stairs: guide rail, carriage with control panel and a platform with two access ramps.

The guide rail is fixed to the wall or to posts set on the steps. The user calls the platform lift with a key at the landing, the platform and safety arms unfold automatically, and a wheelchair user travels up without anyone's help. After the trip the platform folds away. Travel can be controlled both from the platform and from the landing station, so an attendant can help the user. The model works indoors and outdoors, on stairs with an inclination of up to 45°. At 0.15 m/s the platform covers a five-metre flight in about half a minute.

ParameterInclined platform lift for straight stairs
Drivegear drive
Rated load225 kg
Speed0.07 / 0.15 m/s
Stair inclination angleup to 45°
Route lengthup to 17 m
Platform800 × 1050 mm (standard)
Platform, safety arms, access rampsfully automatic
Controlskey call at the landings, buttons for unfolding and folding the platform; travel and emergency stop buttons on the platform
BodyRAL powder coating or stainless steel
Power supply220 V, 50 Hz, single-phase
Inclined platform lift with its platform folded at the foot of outdoor stairs, guide rail on posts along the flight
Guide rail on posts along an outdoor flight; the platform lift is parked at the bottom with its platform folded.

When unfolded, the 800 × 1050 mm platform blocks part of the flight. So in a building with heavy foot traffic the platform lift is installed on a separate staircase, or a vertical one is specified instead. The 225 kg rated load is designed for a person in a wheelchair; a heavy powered wheelchair together with its user can weigh more, and then the 300 kg model is needed.

Platform lift for curved stairs

Inclined platform lift for curved stairs at the foot of outdoor stairs by a stone wall
Platform lift for stairs with a turn: a guide rail made of two profiles on posts follows the line of the flight.

Stairs with turns, intermediate landings or a changing gradient need a guide rail made for the specific flight. It is made of two aluminium profiles painted with RAL 9006 epoxy paint and is mounted on metal posts fixed to the floor or on brackets fixed to the wall. The platform, made of galvanized steel and aluminium, has a PVC coating in RAL 7047.

ParameterInclined platform lift for curved stairs
Rated load300 kg
Speed0.07 m/s; 0.13 m/s with soft start and stop as an option
Platformfrom 650 × 860 mm
Platform, safety arms, access rampsunfold and fold automatically
Controlshold-to-run buttons at the landings and on the platform, emergency stop, key
Safetyoverspeed governor, protection against trapping and impact, double protection of electrical circuits
Power supply230 V, 50 Hz, single-phase, 16 A
Control circuits24 V
Powerup to 0.75 kW

A remote control, operation during a power failure and a fold-down seat can be added to order.

KT-62 stairlift

KT-62 stairlift on its rail at the foot of a wooden staircase with a turn, in a room
KT-62 on a curved rail by the stairs in a house.

The stairlift is intended for older people and people with musculoskeletal disorders who move about on their own. The user sits down, fastens the belt and rides along the rail. The seat folds and swivels; when folded, the chair projects 340 mm from the wall. The stairlift is called with a remote control, and between trips it stays at a stop and charges. The rail is made for both straight stairs and stairs with turns. A person who cannot transfer out of a wheelchair needs a platform lift.

ParameterKT-62
Drivegear drive
Rated load130-150 kg
Speed0.07 / 0.13 m/s
Stair inclination angleup to 45°
Guide railspecial aluminium rail
Callremote control
Chargingautomatic at the stops
Safetyseat belt, armrests, contact switches
Power supply220 V, 50 Hz, single-phase
Chair width585 mm
Depth750 mm unfolded, 340 mm folded
Seat height507-575 mm

What we need for selection

For an inclined platform lift or a stairlift, the main thing is to know the stairs. Count the steps, and measure the flight width, the step height and depth, and the size of the landings at the bottom and the top. Note what the wall along the flight is made of: this decides whether the guide rail is fixed to it or posts are needed. For stairs with a turn, take a photo of every flight and landing.

With these data, leave a platform lift request and we will arrange a free site survey. Dimensional drawings of the inclined platform lift and the stairlift are in the booklet (PDF).

Equipment selection

Get options for your building

Leave your phone number: an engineer will confirm the shaft dimensions and send options from several factories. The site survey is free.

Request configurator

Build your request on the drawing

Drag the arrows on the drawing or type in the dimensions, and a 3D model is built alongside. If you don't have the dimensions yet, your name and phone number are enough.