Passenger and freight lifts, panoramic cars, hospital versions, escalators and moving walks are produced under the IZAMET brand. We supply, install and maintain Izamet lifts: we survey the shaft, select the series and the car, install and commission the lift and put it into service. Below is a brief overview of the range, the documents and our projects; the details are set out on the pages of this section.
Three lift types in the current certificates
The current Ukrainian certificates under which we work with these lifts were issued by the conformity assessment body TESKO LLC. They name three types with the following limits.
| Type | Models | Rated load | Speed | Travel and stops |
|---|---|---|---|---|
| IBL | Genesis 12, 21, 22, EnEf | 320-2000 kg | up to 2.0 m/s | up to 60 m, 25 stops |
| IRL | German R, German S, IZA | 320-3500 kg | up to 2.0 m/s | up to 100 m, 36 stops |
| IH | hydraulic | 320-6000 kg | up to 0.63 m/s | up to 22 m, 8 stops |
These are the maximum values for each type; at speeds above 1.0 m/s the rated load is limited to 2000 kg. Each type is available with or without a machine room, and the doors are sliding, centre-opening or side-opening. Tables of shafts, pits, headroom and power ratings are collected on the "Series and parameters" page.
The certificates record TEMAZI Ltd as the manufacturer of these models; the production address is Dupnitsa, Bulgaria. Why this name appears in the paperwork for an IZAMET-brand lift is explained on the "Documents for an Izamet lift" page. The numbers, validity periods and content of each certificate are given separately: "Certificates".
Sections by intended use
Passenger lifts. Lifts for residential buildings, offices and hotels, 320-2000 kg. The car is chosen separately from the series: Classic in skinplate or stainless steel, Lux IS in satin stainless steel, Lux MR in textured or mirror steel, Nature in wood.
Panoramic lifts. Glass walls, laminated glass doors, a steel-frame shaft. We have installed such lifts in Chernivtsi, Lviv, Dolyna, Bukovel and Ivano-Frankivsk. More than two hundred photos are collected on the page itself and in the "Photos" gallery.
Freight lifts and dumbwaiters. Electric lifts up to 3500 kg and hydraulic lifts up to 6000 kg for warehouses, shops and production facilities, as well as 100 and 150 kg kitchen dumbwaiters for restaurants.
Vehicle lifts. A lift car rated at 3500 or 4000 kg for car parks, vehicle showrooms and private garages, hydraulic or electric without a machine room.
Lifts for people with disabilities. Cars from 1100×1400 mm with 900 mm doors, the LP14 lift with a pit from 200 mm, stairlifts.
German Gift lifts. An equipment package for 320-600 kg lifts with six finish options.
Escalators and moving walks. IZA escalators with a step width of up to 1000 mm and a rise of up to 6 m, IZA-MW moving walks with a pallet width of up to 1400 mm. The page gives dimensions, weight and support loads.
Where the brand comes from
According to the manufacturer's materials, the history of the brand began in Bulgaria in 1989 with the maintenance of other companies' lifts. In 1991 its own kitchen dumbwaiters and goods platforms appeared, and in 1992 the company took on the passenger lift. Next came a 6000 m² workshop in Sofia, where the gearless drive and machine-room-less lifts were mastered, then certification under European Directive 95/16 and a factory in Dupnitsa on a 42,000 m² site, with which escalator production began.
We have visited both sites and photographed the workshops. The photos are on the "Factory in Dupnitsa" and "Factory in Sofia" pages.
Our projects with Izamet lifts and escalators
Our most recent project is an external panoramic lift in the courtyard of the Regional State Administration in Chernivtsi, put into service in 2026. At the Mens shopping centre in Ivano-Frankivsk in 2021 we installed a 1000 kg panoramic lift, a passenger and freight lift and six escalators. Our hospital projects include a lift at the Zabolotiv hospital, a lift replacement in Rozhniativ and a 1275 kg hospital lift in Lviv with a shaft extension. In residential and office buildings, lifts of this brand operate in Ivano-Frankivsk (15 Vynohradna St., Park Hotel residential complex), Lviv (3 Chuprynky St.) and Ternopil (a hotel). All projects with photos are collected in the "Our projects" section.
What we do
Work starts with a survey of the shaft or of the place for it; the survey is free. Based on the survey we select the type, rated load and car, and agree the installation drawing with the client. Supply and installation follow, then commissioning and testing. For each lift we hand over, we draw up a declaration of conformity, and after start-up we take it on for maintenance under a contract. We carry out the assembly, installation and final inspection of lifts under our own Module D certificate No. UA.TR.006.D.113601-25, valid until 11.09.2028.
Archive images
We keep two images as archive material. The first shows the escalator certificate that was valid from 2016 to 2019, the second the cover of a 2018 brochure. The current documents are listed on the certificates page.
To get options, send us the shaft dimensions and the number of stops or leave a request for a site survey.
Shaft drawings and a detailed description of the series are available on a separate website, izamet.com.ua.
